CAM Toolpaths

V-Carve, Engraving & Prism Carving

Carve sharp variable-depth signage with V-Carve, manage flat-depth clearance tools, and machine raised beveled lettering with Prism Carving.

V-Carving rides a pointed V-bit down the mathematical centerline between opposing walls of a closed vector. Where a letter stroke widens, the V-bit plunges deeper; where a serif tapers to a point, the bit lifts cleanly to a razor-sharp corner.

VibeCNC V-Carve and Engraving toolpath panel
Configure Start Depth, Flat Depth clearance tools, and V-bit angle inside the V-Carve panel.

Choosing the Right V-Bit Angle

V-Bit AngleCut ProfileBest Used For
30 degDeep, narrow V-grooveTiny intricate text (under 0.5" tall), fine line logos, and detailed end-grain inlays.
60 degBalanced crisp depthAll-purpose shop signs, 0.75" to 3" tall lettering, and classic serif plaques.
90 degWide, shallow bevelLarge bold titles (3"+ tall), shallow thin stock, and dramatic shadow lines.
120 degVery shallow wide chamferGiant storefront letters on thin 1/2" stock without blowing through the back.

Using Flat Depth & Clearance Tools

Without a depth limit, a 60-degree V-bit inside a 1-inch wide letter plunges almost 0.87" deep, punching straight through standard 3/4" lumber. Check Flat Depth (F) (typically 0.12" to 0.20") and assign a flat end mill (such as a 1/8" or 1/4" downcut) as your Clearance Tool:

  1. VibeCNC clears the flat interior floor rapidly with the flat end mill (saving huge time and leaving a dead-flat bottom).
  2. The V-bit then traces only the angled perimeter walls and sharp interior corners.

Prism Carving (Raised Beveled Letters)

Found under Specialty+, Prism Carving reverses the V-carve look by profiling around the outside of letters with a V-bit to create tall, faceted, pitched-roof lettering standing proud above the board surface, similar to traditional gilded architectural signage.