CAM Toolpaths

3D Roughing, 3D Finishing & 3D Projection

Carve 3D reliefs and STL/STEP models accurately with Z-Level roughing, fine ball-nose stepover finishing, and Project Toolpath onto 3D Model.

Machining a 3D relief or imported STL model is normally a two-stage process: hog out heavy waste quickly with a rigid flat end mill (3D Rough), then sweep final sculpted details with a small ball-nose or tapered ball-nose cutter (3D Finish).

VibeCNC 3D Rough Machining panel
Control Machining Limit Boundary, Machining Allowance, and Z-level roughing strategy in the 3D Rough panel.

3D Roughing Parameters

ParameterRecommended ValueWhy It Matters
Tool1/4" or 1/2" flat end millRemoves 85%+ of bulk waste quickly so the small finishing bit never snaps.
Machining Limit BoundarySelected Vector(s)Restricts cutting tightly to your relief silhouette instead of wasting hours on flat border wood.
Boundary OffsetHalf finishing bit diameter (or 0.05")Lets the bit roll slightly past the outer edge so the relief wall finishes cleanly.
Machining Allowance0.03" to 0.05"Leaves a protective skin over the model so roughing tear-out never mars the final surface.
StrategyZ-Level (default) or 3D RasterZ-Level slices flat horizontal terraces fast; 3D Raster follows slopes closely for softer materials.

3D Finishing & Stepover Guide

The finishing bit makes a single full-depth pass over the thin skin left by roughing. Surface smoothness depends directly on Stepover %:

  • 7% to 9% Stepover: Museum-grade smooth detail requiring almost zero hand sanding.
  • 10% to 12% Stepover: Great balance of speed and clean detail for plaques and signs.
  • 15% to 20% Stepover: Fast rustic finish for large wall art viewed from a distance.

Use Raster aligned with the wood grain (or at 45 degrees) for flat plaques, and Offset for circular medallions and rosettes.

Project Toolpath onto 3D Model

Inside 2D Profile, Pocket, V-Carve, and Quick Engrave forms, check Project toolpath onto 3D model to drape 2D text or borders cleanly across curved 3D ribbons, arched banners, or dished bowls while keeping cut depth uniform across the curved surface.