CAM Toolpaths

V-Carve Inlay & Standard Inlay Toolpaths

Master gap-free contrasting hardwood V-Carve Inlays and straight-bit Standard Inlays with exact depth math, glue gaps, and surface clearance.

VibeCNC supports both V-Carve Inlays (tapered wedged joinery for cutting boards, boxes, and intricate logos) and Standard Straight Inlays (automatic corner-radius compensation for flat-bottomed male/female inlays).

Cross-section diagram showing female pocket depth, male plug start depth, glue gap, and saw clearance
A V-carve inlay locks tight along its angled walls while leaving space at the bottom for glue and space at the top for flush-sawing.
VibeCNC V-Carve Inlay configuration panel with live cross-section diagram
The Inlay drawer previews your exact Female Pocket and Male Plug clearances in real time.

Proven V-Carve Inlay Depth Recipes

Both halves must use the exact same V-bit angle (60 degrees for general inlays, 30 degrees for fine script or delicate graphics). Here are three battle-tested shop recipes:

ApplicationFemale Pocket DepthMale Plug Start DepthMale Plug Flat DepthResulting Clearances
End-Grain Cutting Board0.20"0.15"0.10"0.15" deep inlay, 0.05" glue gap, 0.10" saw kerf gap
Deep Heavy-Use Board0.25"0.20"0.10"0.20" deep inlay, 0.05" glue gap, 0.10" saw kerf gap
Thin Lid / Keepsake Box0.14"0.10"0.08"0.10" deep inlay, 0.04" glue gap, 0.08" saw kerf gap

Shop Tips for Zero-Gap Inlays

  • Always Mirror the Male Plug: VibeCNC handles mirroring automatically when generating the Male Plug side, and adds a clearance border box around the plug.
  • Match Grain Orientation: When inlaying into an end-grain cutting board, use end-grain plug stock too so wood movement stays matched across seasons.
  • Standard Straight Inlay: For large geometric inlays cut with a 1/8" straight end mill, select Standard Inlay. VibeCNC automatically adds internal/external bit-radius compensation and optional 0.005" to 0.010" slip allowance so male inserts drop cleanly into female pockets.